Pantum BP5100 Series - Removing the optional tray

34
5. Plug the power cord into the printer and turn on the power.
After installing the optional tray, you need to update the printer status again (For how to update the
printer status, see “Updating the optional tray status”) .
Note: • For precautions on loading paper, see “Paper and Print Media”.
• For the type of media to be printed with the optional tray, see the “Paper Specification”.
• For the installation of optional trays, please refer to the Installation Guide supplied with the optional
trays.
Removing the optional tray
1. Turn off the printer.
2. Unplug the power cord from the electrical outlet, and then unplug the power cord from the
printer.