Pantum M7100DW Series User Manual

9.3.3. Scan to FTP
1.
Be sure the printer and the computer are both switched on and connected with each
other properly.
2.
Please see Chapter 6.2.3.3 to configure the FTP address book (for machine with the fax
feature, alternatively, see Chapter 12.7).
3.
Put an original on the glass platen or into the ADF (please see Chapter 2.5 for how
to
put an original).
4.
Press "Scan" button on the control panel, and press “▲” or “▼" to select "Single Page
Scan" or "Merge Scan", then press "OK" button.
5.
Press "Menu" and then "OK" to enter the "Scan Setting" interface.
6. Press "▲" or "▼" to select "Scan To" options; then, press OK.
7.
Press “▲” or “▼" to select "Scan to FTP" and press "OK" button.
Be sure the user is in an Internet-connected environment in scanning files to FTP server.
If you want to scan large files, you may need to input the server address, user name and
password to log in the server, with specific operation steps as below:
8.
Press “▲” or “▼" to select the server and press "OK" button; Press "Start" button to start
scan.
9.
For merge scan, please put files to be scanned on the glass platen and then press
"Start" to scan the next page (directly continuous scanning is available if scanning with the
ADF).
96

Pantum M7100DW Series Specifications

General

Print Technology	Monochrome Laser
Print Resolution	1200 x 1200 dpi
Connectivity	USB 2.0, Ethernet, Wi-Fi
Duplex Printing	Automatic
Input Capacity	250 sheets
Scanner Type	Flatbed, ADF
Processor	600 MHz
Memory	256 MB
Recommended Monthly Page Volume	750 to 3, 500 pages
Scan Resolution	Up to 1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Operating Systems	Windows, macOS, Linux
Monthly Duty Cycle	60, 000 pages
Output Capacity	150 sheets
ADF Capacity	50 pages
Media Sizes	A4, A5, A6, Letter, Legal
Media Weight	60-163 g/m²
Mobile Printing	Pantum App, Apple AirPrint, Mopria
Print Speed	33 ppm (A4) / 35 ppm (Letter)
Copy Speed	33 cpm (A4) / 35 cpm (Letter)