Pantum M7100DW Series User Manual

12.General Settings
This Chapter mainly introduces some general settings.
Note: • The panel appearance may be a little different due to difference in type or
function. All diagrams are only for reference.
12.1. System Settings
12.1.1. Ink saving setting
1) Press "Menu" to enter the menu setting interface.
2) Press "▲" or "▼" to select "System Setting" and then press "OK".
3) Press "▲" or "▼" to select "Toner save set" and then press "OK" to enable/disable
the Ink Saving mode.
You can select the save toner mode which can reduce toner consumption and reduce printing
cost. When save toner mode is “on”, the printed color will be lighter. Save toner mode is “off”
by default.
112

Pantum M7100DW Series Specifications

General

Print Technology	Monochrome Laser
Print Resolution	1200 x 1200 dpi
Connectivity	USB 2.0, Ethernet, Wi-Fi
Duplex Printing	Automatic
Input Capacity	250 sheets
Scanner Type	Flatbed, ADF
Processor	600 MHz
Memory	256 MB
Recommended Monthly Page Volume	750 to 3, 500 pages
Scan Resolution	Up to 1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Operating Systems	Windows, macOS, Linux
Monthly Duty Cycle	60, 000 pages
Output Capacity	150 sheets
ADF Capacity	50 pages
Media Sizes	A4, A5, A6, Letter, Legal
Media Weight	60-163 g/m²
Mobile Printing	Pantum App, Apple AirPrint, Mopria
Print Speed	33 ppm (A4) / 35 ppm (Letter)
Copy Speed	33 cpm (A4) / 35 cpm (Letter)