Pantum M7100DW Series User Manual

Fax
sending
fault
The dialing fails to be
done
•
Please check the connection of power cable.
•
Please check the connection of telephone line.
•
The printer is poor in
transmitting files
•
Make one copy of original to check if the fax
scanner could work normally.
• Transmit with a higher resolution.
A prompt of
"Communication Failure"
appears in printing the
fax confirmation report
•
•
Change the (audio/pulse) settings. Please set in
the fax sending menu with the dialing way
supported for telephone line.
The telephone line may suffer from temporary
noise or electrostatic interference. Please send the
fax again.
Please try to set as VoIP in compatibility and then
send again. (Please see Chapter 10.3.3
for compatibility setting.)
If the problem still occurs, please check the
telephone line.
144

Pantum M7100DW Series Specifications

General

Print Technology	Monochrome Laser
Print Resolution	1200 x 1200 dpi
Connectivity	USB 2.0, Ethernet, Wi-Fi
Duplex Printing	Automatic
Input Capacity	250 sheets
Scanner Type	Flatbed, ADF
Processor	600 MHz
Memory	256 MB
Recommended Monthly Page Volume	750 to 3, 500 pages
Scan Resolution	Up to 1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Operating Systems	Windows, macOS, Linux
Monthly Duty Cycle	60, 000 pages
Output Capacity	150 sheets
ADF Capacity	50 pages
Media Sizes	A4, A5, A6, Letter, Legal
Media Weight	60-163 g/m²
Mobile Printing	Pantum App, Apple AirPrint, Mopria
Print Speed	33 ppm (A4) / 35 ppm (Letter)
Copy Speed	33 cpm (A4) / 35 cpm (Letter)