Pantum M7100DW Series User Manual

4. Put a flat printing medium into the manual feed tray with both hands.
Note:
•
Please put one printing medium inside the manual feed tray each time and
put in another piece after finishing printing.
•
Put the printing medium inside the manual feed tray with the printing side
up; the top of paper should be put inside first.
5.
When the printed page is output from the printer, put the second piece inside according to
the above steps to continue printing. Slow action will lead to the prompt of paper out or paper
failure of manual feed tray. After paper is put inside, printing will be resumed automatically;
too quick action may make paper caught up in the printer, which will easily result in paper jam.
Note:
The printer will enter manual feed mode automatically when you put papers
inside the manual feed tray.
•
•
After printing, please take out printed papers output from printer immediately.
Stacked papers or envelops will lead to paper jam or wrapped paper.
17

Pantum M7100DW Series Specifications

General

Print Technology	Monochrome Laser
Print Resolution	1200 x 1200 dpi
Connectivity	USB 2.0, Ethernet, Wi-Fi
Duplex Printing	Automatic
Input Capacity	250 sheets
Scanner Type	Flatbed, ADF
Processor	600 MHz
Memory	256 MB
Recommended Monthly Page Volume	750 to 3, 500 pages
Scan Resolution	Up to 1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Operating Systems	Windows, macOS, Linux
Monthly Duty Cycle	60, 000 pages
Output Capacity	150 sheets
ADF Capacity	50 pages
Media Sizes	A4, A5, A6, Letter, Legal
Media Weight	60-163 g/m²
Mobile Printing	Pantum App, Apple AirPrint, Mopria
Print Speed	33 ppm (A4) / 35 ppm (Letter)
Copy Speed	33 cpm (A4) / 35 cpm (Letter)