Pantum M7100DW Series User Manual

5. Click “Agree” on the prompt window popping out to accept the licensing agreement.
6. Click “Install”.
7. Input computer password and click “Install Software”.
8. Click “Continue Installation” on the prompt window popping out.
9. The system will finish driver installation automaticall .
• If using a USB cable to connect a computer with a Wi-Fi model printer, a wireless network
configuration prompt window will pop up during driver installation, as shown in following
picture.
Note: • Click “Yes
”, you can configure printer’s wireless network via wireless network
configuration tool (refer to Chapter 5.1.1 for how to make configuration).When
configuration is completed, unplug USB cable, and then on the pop-up “Add
Printer” interface, you may add the network-connected printer(refer to Chapter 3.3
for how to add printer).
• Click “No”, you can add a USB-connected printer on the pop-up “Add Printer”
interface (refer to Chapter 3.3 for how to add printer).
If using a USB cable to connect a computer with a non-Wi-Fi model printer, a “Add Printer”
interface will pop up during the driver installation and you can add a printer here (refer to
Chapter 3.3 for how to add printer).
44

Pantum M7100DW Series Specifications

General

Print Technology	Monochrome Laser
Print Resolution	1200 x 1200 dpi
Connectivity	USB 2.0, Ethernet, Wi-Fi
Duplex Printing	Automatic
Input Capacity	250 sheets
Scanner Type	Flatbed, ADF
Processor	600 MHz
Memory	256 MB
Recommended Monthly Page Volume	750 to 3, 500 pages
Scan Resolution	Up to 1200 x 1200 dpi
Copy Resolution	600 x 600 dpi
Operating Systems	Windows, macOS, Linux
Monthly Duty Cycle	60, 000 pages
Output Capacity	150 sheets
ADF Capacity	50 pages
Media Sizes	A4, A5, A6, Letter, Legal
Media Weight	60-163 g/m²
Mobile Printing	Pantum App, Apple AirPrint, Mopria
Print Speed	33 ppm (A4) / 35 ppm (Letter)
Copy Speed	33 cpm (A4) / 35 cpm (Letter)