Pantum P2502W Plus User Manual

15
• When you select "Wi-Fi" or "Wired Network", before clicking "One-click Installation",
you shall move the mouse cursor on the "One-click Installation" button to check the
prompt information in the pop-up window, and verify whether the current printer is the
one you desire through the IP address. (For information on how to obtain the IP
address of the printer, you may refer to Section 8.1.1.3, and print the "Network
Configuration Page" to check.)
• The "Wi-Fi" connection is only available for Wi-Fi models (models with a "W" in the
model number, such as "P2500W"). When the computer is connected to wired
network, it is necessary to set the wireless network of the printer. Please enter the
Wi-Fi name and password in the following interface, and click "OK" to install the driver.
6．The installation software will automatically install the driver, and the installation process may take
some time. Please wait patiently.

Pantum P2502W Plus Specifications

General

Print Technology	Monochrome Laser
Print Speed	22 ppm
Print Resolution	1200 x 1200 dpi
Maximum Monthly Duty Cycle	15, 000 pages
Processor Speed	600 MHz
Memory	128 MB
Connectivity	USB 2.0, Wi-Fi
Wireless	Yes
Paper Input Capacity	150 sheets
Paper Output Capacity	100 sheets
Duplex Printing	Manual
Supported Operating Systems	Windows, macOS, Linux
Media Sizes Supported	A4, Letter, Legal
Media Types Supported	Plain, Thick, Label, Envelope, Thin
Dimensions	337 x 220 x 178 mm
Power Consumption	Average 370W, Sleep 2.0W