Pantum P2502W Plus User Manual

47
7.3. Manual Duplex
1. The printer driver supports manual duplex.
Note:
•If the paper is thin, it may wrinkle.
• If the paper is curled, make it flat and put it back into the manual feeder tray or automatic
feeder tray.
• If the manual duplex function causes a paper jam, see Section 10.1 for handling it.
2. Ensure that certain amount of paper is loaded into the automatic feeder tray before printing.
Note:
• For loading paper, see Section 2.2.
• For the type of media that can be printed with the automatic feeder tray, see Section 2.1. It is
recommended to use the standard paper.
• Some paper media are not suitable for the duplex printing. Trying the duplex printing with it
may damage the printer. When Paper Type is Thick or Transparency, please do not try Duplex
Printing. If 2 x 2 Poster Print is checked in the Printing Preferences dialog box, Manual Duplex
will not be supported.
• Paper will get jammed or cannot be fed in when the automatic feeder tray is loaded with
more than 150 sheets.
3. Printing steps are as follows (for Windows system only) :
1) Open the document to be printed from the application (such as Notepad), and select Print from the
File menu

Pantum P2502W Plus Specifications

General

Print Technology	Monochrome Laser
Print Speed	22 ppm
Print Resolution	1200 x 1200 dpi
Maximum Monthly Duty Cycle	15, 000 pages
Processor Speed	600 MHz
Memory	128 MB
Connectivity	USB 2.0, Wi-Fi
Wireless	Yes
Paper Input Capacity	150 sheets
Paper Output Capacity	100 sheets
Duplex Printing	Manual
Supported Operating Systems	Windows, macOS, Linux
Media Sizes Supported	A4, Letter, Legal
Media Types Supported	Plain, Thick, Label, Envelope, Thin
Dimensions	337 x 220 x 178 mm
Power Consumption	Average 370W, Sleep 2.0W