Pantum P2502W Plus User Manual

52
8.1.1.2. Operation Function of Cancel/Continue Button
If the printer is in sleep mode, press or press and hold this button can wake it up.
Press and hold this button during printing can cancel the current print job.
When the printer is in ready mode, press and hold this button can print the test page.
8.1.1.3. Operation Function of Information Button
When the printer is in ready mode, press and hold this button can print the test page.
8.1.2. Function of LED Indicators on the Control Panel
8.1.2.1. LED1 Status Indication
The meanings of the status indication of LED1 are as follows:
Serial No.
Paper/Wi-Fi
Multi-colored
LED1 Status
Indication
Status Description
(For printers with USB+W-iFi
interface)
Status Description
(For printers with USB
interface)
1
No Wi-Fi connection, no paper error,
sleep mode
LED1 off
No Wi-Fi connection, no paper
error, sleep mode
LED1 off
2
Searching W-iFi, no indication of
paper error
LED1 with green light flashing slowly
N/A
3
Successful Wi-Fi connection, no
paper error
LED1 with green light staying on
N/A
4
Paper Jam Error
LED1 with red light staying on
Paper Jam Error
LED1 with red light staying on
5
Paper shortage in printing, or failed in
feeding
LED1 with red light flashing quickly
Paper shortage in printing, or
failed in feeding
LED1 with red light flashing
quickly

Pantum P2502W Plus Specifications

General

Print Technology	Monochrome Laser
Print Speed	22 ppm
Print Resolution	1200 x 1200 dpi
Maximum Monthly Duty Cycle	15, 000 pages
Processor Speed	600 MHz
Memory	128 MB
Connectivity	USB 2.0, Wi-Fi
Wireless	Yes
Paper Input Capacity	150 sheets
Paper Output Capacity	100 sheets
Duplex Printing	Manual
Supported Operating Systems	Windows, macOS, Linux
Media Sizes Supported	A4, Letter, Legal
Media Types Supported	Plain, Thick, Label, Envelope, Thin
Dimensions	337 x 220 x 178 mm
Power Consumption	Average 370W, Sleep 2.0W