Pantum P2502W Plus User Manual

II
The product can be used safely in the non- tropical areas at an altitude no higher than 2000 meters.
Safety Precautions
Disconnect the power supply
The product should be placed close to or easily accessible to power sockets, so as to allow easy
disconnection of power supply!
Laser Safety
The laser radiation is harmful to the human body. Since laser components are completely sealed in
the printer, laser radiation will not leak. To avoid laser radiation, please do not randomly
disassemble the printer!
The printer follows the provisions of Class 1 laser products under CFR standard.
The printer has a Class III B laser diode, which has no laser radiation leakage among laser
components.
The laser components shall complies with the requirements of: U.S. Code of Federal Regulations,
21 CFR 1040, IEC 60825-1
The following label is attached to the laser components inside the printer:

Pantum P2502W Plus Specifications

General

Print Technology	Monochrome Laser
Print Speed	22 ppm
Print Resolution	1200 x 1200 dpi
Maximum Monthly Duty Cycle	15, 000 pages
Processor Speed	600 MHz
Memory	128 MB
Connectivity	USB 2.0, Wi-Fi
Wireless	Yes
Paper Input Capacity	150 sheets
Paper Output Capacity	100 sheets
Duplex Printing	Manual
Supported Operating Systems	Windows, macOS, Linux
Media Sizes Supported	A4, Letter, Legal
Media Types Supported	Plain, Thick, Label, Envelope, Thin
Dimensions	337 x 220 x 178 mm
Power Consumption	Average 370W, Sleep 2.0W