2-4
2.3. LOADING PAPER
2.3.1. LOADING INTO THE AUTOMATIC FEEDER TRAY
1. Slide out the automatic feeder tray from the printer.
2. Adjust the automatic feeder tray’s paper length and width guides to the desired paper size
slot; so that they are consistent with the length and width of the paper.
3. Before loading paper, please unfold the stacked paper to avoid a paper jam or feed error,
and then load the paper into the tray print-side down.
The automatic feeder tray can be loaded up to 250 pages, 80g/m
2
paper.
Note: • Do not overly squeeze the "paper length guide" and "paper width guide",
otherwise it could easily lead to deformation of paper.
To Next Page
Loading...
