7-4
7.2.2. REPLACING THE TONER CARTRIDGE
Follow the steps below to replace the toner cartridge:
1. Power off the printer.
2. Open the front cover and remove the used toner cartridge along the guides.
3. Open the package of a new toner cartridge, hold the handle of the toner cartridge and
gently shake around 5-6 times, so as to evenly distribute the toner inside the toner cartridge.
Note: Before replacing the toner cartridge, please pay attention to the following:
• The toner cartridge surface may contain toner. Please remove it carefully to
avoid spilling.
• Put the removed toner cartridge onto a piece of paper to avoid the toner from
accidently spilling.
• After removing the protective cover, please immediately install the new toner
cartridge into the printer, so as to avoid damaged by exposing it to too much
direct natural or artificial light.
• When installing, do not touch the surface of the toner cartridge, so as to avoid
scratching it.
To Next Page
Loading...
Need help?
General