cod.
97845
'r
l
apillon
6. When the engine
is
running and idling, the throttle lever on handle is
as
below picture.
First press the
lock
off
lever and then switch the throttle lever on, the machine will be working.
7.
If
use Nylon cutter, before cutting, need to bump
it
to feed line firstly.
8.
If
any problem occurs, press the engine switch, the machine will stop running.
If
you need stop cutting head working, release the throttle lever.
9.
If
any problem occurs, pull the pin
of
safety belt, then release the brush cutter immediately.
38
To Next Page
Loading...
