Need help?Do you have a question about the ParaBody 440 and is the answer not in the manual?
Read all warnings and instructions before using the machine for intended exercise.
Obtain a medical exam before beginning any exercise program.
Keep body and clothing clear of moving parts during operation.
Inspect machine before use; do not use if damaged. Notify dealer for repairs.
Ensure weight pin is fully inserted before use. Use only manufacturer-provided pin.
Never pin weights or prop plates in an elevated position. Do not use if found in this condition.
Inspect cables and connections before use, paying attention to cable ends.
Ensure spring-loaded pull pins are fully engaged and thumbscrews tightened before use.
Keep children away from the machine and supervise teenagers.
Assemble product on a flat, level surface for proper function.
Do not securely tighten frame connections until entire frame is assembled, unless stated otherwise.
Lists tools needed for assembly, including wrenches, sockets, and Allen wrenches.
Lifetime warranty for frame and welds against cracking or breaking.
Lifetime warranty on specified parts against defects in material or workmanship.
Three-year warranty against defects in material or workmanship for cables and upholstery.
Warranty voided by misuse, abuse, alteration, unauthorized repair, improper assembly, or accident.
Contact Customer Service for service, providing dealer name, purchase date, serial number, and problem description.
Clean product (pads and frame) regularly with warm soapy water.
Inspect equipment daily, tighten loose connections, and replace worn parts.
Lubricate guide rods regularly with a teflon-based lubricant.
Record model, serial, purchase date, and dealer information for service needs.
Lists all parts with key numbers, part numbers, descriptions, and quantities.
Details attaching LAT BAR, AB CRUNCH STRAP, and LOW ROW BAR to cables.
Explains how to adjust cable tension for optimal performance.
Attaching rear upright, routing leg extension cable, and assembling pulleys.
Assembling pulley to lever stop and attaching lever stop to weight stack base.
Adjusting cable tension for proper head plate seating and slack removal.
Routing and assembling the AB cable with pulleys and brackets.
Attaching weight black hasp, sliding shaft, and assembling pulley to press arm lever.
Applying paraglides to the inside of the receiving tube.
Inserting bearings, attaching receiving tube, and inserting adjustment tube.
Sliding shaft through press arm and rear upright, inserting bearings.
Assembling pulley for PEC cable and routing cable to PEC cams.
Attaching adjustment slide to the press arm.
Routing leg extension cable and attaching pulleys to swivel bracket.
Inserting and securing the push/pull cable to the control lever.
Connecting push/pull cable to spring pin housing and I-bracket.
Tightening set screws, inserting end caps, and attaching adjustment slide components.
Routing leg extension cable around pulleys and assembling upper pulley.
Assembling pec seat pad and roller pads to the front upright.
Routing lat cable, connecting to weight stack shaft, and assembling lateral pulley.
Loosely attaching front upright, frame support, and top boom to the base.
Routing lat cable through top boom and assembling pulleys.
Installing bushings into weight plates and assembling weight plate shaft.
Inserting guide rods, sliding weight plates, and inserting cap plugs.
Connecting guide rods, top boom, rear upright, and front upright.
Assembling roller pads and a pulley to frame and brackets.
Securely tighten all previously made loose frame connections.
Attaching seat pads and assembling leg curl/extension unit.
Assembling pulleys and cable retaining clips to the center pulley bracket.
Attaching wolff sleeve, plates, hinge tabs, and rubber bumper to back pad support.
Assembling bearing housing and center pulley bracket to front upright.
Assembling pec arms, thrust washers, and cams, then securing them.
Installing wolff sleeve, spring pins, and thumbscrew for pec arm system.
Fastening leg support to base and frame support to leg support.
To Next Page
General
