ParaBody 415101 - User Manual

Serious Steel
415101 400 LEG PRESS ADAPTER KIT
ASSEMBLY INSTRUCTIONS
Part# 6694601
II
Revision: 06/12/97

Summary

Parts List and Initial Steps

Step 1: Prepare Front Leg

Slide PARABODY LOGO END CAPS over the FRONT LEG.

Step 2: Attach Base Connection

Slide SQ. END CAP into the BASE CONNECTION.

Step 3: Prepare Pulley Bracket

Attach GLIDES to the top of the PULLEY BRACKET.

Assembly Steps - Part 2

Step 4: Secure Front Leg Assembly

Fasten FRONT LEG and BASE CONNECTION to the HOME GYM.

Step 5: Remove Existing Pulley

Remove existing PULLEY and SPACERS from the ADJUSTMENT TUBE.

Assembly Steps - Part 3

Step 6: Attach Cable Swivel

Step 7: Fasten Leg Press to Front Leg

Assembly Steps - Part 4

Step 8: Remove Existing Lat Cable

Assembly Steps - Part 5

Step 9: Install New Cable Assembly

Step 10: Loop New Cable

Assembly Steps - Part 6

Step 11: Attach Second Cable

Assembly Steps - Part 7

Step 12: Secure Second Cable

Step 13: Attach Pulleys to Frame

Final Assembly Adjustments

Step 14: Adjust Spring Pin and Cables

ParaBody 415101 Specifications