To Next PageTo Next Page
Need help?Do you have a question about the ParaBody PBF501 and is the answer not in the manual?
Lists the necessary tools for assembling the EX500 Base Unit.
Instruction to keep frame connections loose until instructed to tighten them securely.
Instructions for assembling the base seat support, main back support, and uprights.
Instructions for installing weight stack bumpers and guide rods.
Warning against over-tightening guide rods to prevent binding.
Lists hardware components in Bags #2A and #2B for Step #2 assembly.
Lists and identifies major weldments and parts for Step #2.
Instructions for assembling the leg curl extension and adjustable pre stretch support.
Instructions for assembling the seat frame, pad, and attaching the press arm.
Instructions for attaching paraglide strips and assembling spring pin mechanisms.
Detailed instructions for attaching paraglide strips to components.
Lists hardware and weldments/parts for Step #3 assembly.
Lists hardware and weldments/parts for Step #4 assembly.
Instructions for assembling swivel pulley brackets and routing the primary cable.
Instructions for routing the secondary cable and attaching it to components.
Important warnings, operating instructions, and maintenance recommendations.
General| Type | Home Gym |
|---|---|
| Weight Stack | 210 lbs |
| Stations | 4 |
| Weight Capacity | 300 lbs |
| Resistance Type | Weight Stack |
| Included Accessories | Lat bar, Ankle strap |
