Rout
over bolts.
l
1/2 X3"
1/2 X 3" I
FIGURE 8
STEP 8:
-
¯ LOOSELY assemble Lhc TOP BOOM (2) to the UPRIGHT FRAME (I) using two I/2 X 3" BOLTS (27), one 3/8 X
BOLT (25), one I/2" LOCK WASHER (32), I/2"WASHER (30),one I/2" LOCKNUT (34), and one 3/8" LOC~-I" (36)
as shown ~ FIGUI~ 8.
1/2 X 3"
112 X 3-1/4"
CABLE
over bolts.
FIGURE 9
1/2 X 3"
STEP 9:
¯ LOOSELY assemble the LEFT (7) & RIGHT ($) BOOM SUPPORTS to the UPRIGHTS (5) and TOP BOOM (2) using
X 3" BOLTS (27), two 1/2 X 3-1/4" BOLTS (26), two 1/2" LOCK WASHERS (32), two I/2" WASHERS (30), and four
LOCKNUTS (34) as shown in FIGURE
* SECURELY TIGHTEN ALL LOOSE CONNECTIONS MADE UP TO THIS POINT!
6
5 [ I I
3 4
[ ! I_1
0 1 { ! l I
I I [ I I 1
8
To Next Page
Loading...
