Digiplex & DigiplexNE - 1 - Modules Programming Guide
Grafica Graphic LCD Keypad Module
Grafica Keypads can be used with DGP-848 and DGP-NE96 control panels only. Grafica will not function with DGP-48 control panels.
The keypad’s serial number can be found on the keypad’s PC board. The keypad’s serial number can also be viewed by pressing and holding the [0] key,
entering the [
INSTALLER CODE] and then entering section [000].
U = Default setting
USING THE MEMORY KEY
Download Contents of the Memory Key to the Grafica Keypad.
1) Insert the Memory Key onto the keypad’s connector (refer to “Memory Key Connector” on page 4).
2) To download the contents of the Memory Key, enter the keypad’s programming mode and enter section [100].
3) Once the keypad emits a confirmation beep, wait for a second confirmation beep and then remove the Memory Key.
SECTION [001] : Keypad Partition Assignment SECTION [002] : System Options
Option OFF ON Option OFF ON
[1] Partition 1 N Disabled
U Enabled
[1] Display Code Entry
U Disabled
N Enabled
[2] Partition 2 N Disabled
U Enabled
[2] Display Exit Delay N Disabled
U Enabled
[3] Partition 3 N Disabled
U Enabled
[3] Display Entry Delay N Disabled
U Enabled
[4] Partition 4 N Disabled
U Enabled
[4] Confidential Mode
(not for UL installations)
U Disabled
N Enabled
[5] Partition 5 (DGP-NE96 only) N Disabled
U Enabled
[5] To exit Confidential Mode
U
Enter code
N
Press Button
[6] Partition 6 (DGP-NE96 only) N Disabled
U Enabled
[6] Exit Delay Beep N Disabled
U Enabled
[7] Partition 7 (DGP-NE96 only) N Disabled
U Enabled
[7] Future Use N N/A N N/A
[8] Partition 8 (DGP-NE96 only) N Disabled
U Enabled
[8] Keypad Tamper
U Disabled
N Enabled
SECTION [003] : Beep on Trouble
Option OFF ON
[1] System & Clock Trouble Beep
U Disabled
N Enabled
[2] Communicator Trouble Beep
U Disabled
N Enabled
[3] Module & Combus Trouble Beep
U Disabled
N Enabled
[4]
All Zone Trouble Beep
U Disabled
N Enabled
[5] to [8]
Future Use N N/A N N/A
Section #
[004]
Confidential Mode Timer
___/___/___ (005 to 255 seconds; Default: 120 seconds)
[100] Download all from the Memory Key (Grafica keypad sections [001] to [004] and all user, zone, door and area labels) to the Grafica keypad.
[110] Copy the Grafica keypad sections [001] to [004] and all user, zone, door and area labels to the Memory Key.
DNE-K07
To Next Page
Need help?
General
