Panic Alarms
To send a silent or audible alarm to your monitoring
station, press and hold one of the key combinations
listed below, for 3 seconds.
Trouble Display
How to Bypass Zones
When a zone is bypassed, it remains unarmed when
the corresponding area is armed. To bypass zones:
Alarm Memory Display
To view the alarms that occurred during the last
armed period:
Keypad Settings
To mute the keypad:
To modify the backlight:
Chime Programming
A Chime Enabled zone will advise you every time it is
opened by causing your keypad to beep.
Panic Alarm Key Combinations
Police Keys [1] & [3]
Medical Keys [4] & [6]
Fire Keys [7] & [9]
Step Description
1. Press [TBL]. The word ‘Trouble’
and the number(s) corresponding to the
trouble(s) will be displayed on the screen.
2. Read the corresponding explanation of the
trouble from the trouble list in the MG/SP
User Guide. If no repair instructions are
given, call your security company for
repairs.
3. Press [CLEAR] to exit.
Step Description
1. Press [BYP].
2. Enter your [ACCESS CODE].
3. The corresponding zone number will be
displayed on the screen when open. Select
the zone(s) you want to bypass by entering
the two-digit zone number. For example, to
enter zone 3 enter [10] then [3]. The
corresponding zone indicator will flash.
4. Press [ENTER] to save and exit.
Step Description
1. Disarm the system.
2. Press [MEM].
3. The corresponding zone numbers that were
in alarm the last time the system was armed
will appear on the screen.
4. Press [CLEAR] to exit.
Step Description
1. Press and hold [CLEAR] for 6 seconds to
enable or disable Keypad Muting.
Step Description
1.
Press and hold [
] for 4 seconds.
2. Keys 1, 2, 3, 5 and 6 will flash.
3.
Press [2], then use the [
] and [] to
adjust.
4. Press [CLEAR] or [ENTER] to exit.
Step Description
1. Press and hold [ ]. The word ‘Chime’ will
appear on the screen.
2. Select the zones you want to Chime by
entering the two-digit zone number. The
corresponding zone number will flash. For
example, to chime zone 2 enter [0] then [2].
The keypad will automatically save once
the 2-digit zone number is entered.
3. Press [ENTER] to exit.
© 2019 Paradox Security Systems (Bahamas) Ltd.
All rights reserved. Specifications may change without prior
notice. For complete patent, trademark, certification, and
warranty information, please visit paradox.com.
To Previous Page
Loading...
Need help?
General
