Need help?Do you have a question about the Paradox MG-PMD85 and is the answer not in the manual?
General| Brand | Paradox |
|---|---|
| Model | MG-PMD85 |
| Category | Accessories |
| Language | English |
Details on the recommended height and coverage for the MG-PMD85 detector.
Instructions for adjusting the PCB height to match the installation height for optimal performance.
Explains how to enable or disable the red LED indicator for detected movement and battery status.
Describes the function of DIP switch 2 for selecting single or dual edge processing for false alarm rejection.
Step-by-step guide on installing batteries and connecting the detector to power.
Instructions for safely removing and replacing the detector's batteries.
Details on adjusting the detector's sensitivity using the trimpot, from 1 to 10.
How to check the current sensitivity setting by observing LED flashes.
Procedure to enter Walk-Test mode and its duration for verifying coverage.
How to perform a signal strength test to verify receiver reception before installation.
Explanation of the detector's Alive Software feature and its Energy Save mode.
Lists key technical details of the MG-PMD85 detector.
To Next Page
