Paradox MG5050 Programming Guide

Magellan & Spectra SP • Programming Guide
57
4 Communication trouble
1 Telephone line monitoring on control panel
2 Fail to communicate on monitoring telephone 1, on control panel
3 Fail to communicate on monitoring telephone 2, on control panel
5 Fail to communicate on voice telephone, on control panel
6 Fail to communicate with PC, on control panel
7 Fail to communicate with IP receiver 1 or 2 (GPRS)
8 Fail to communicate with IP receiver 1 or 2 (IP)
9 GSM no service (GSM network failure)
10 IP module no service (network failure)
STAY GSM RF jamming
OFF IP receiver unregistered (IP/GPRS)
5
Tamper and zone wiring failure
1 to 32 Zones in tamper and zone wiring failure
STAY Panel tamper supervision
6 Module tamper trouble
12WPGM
2 Keypad bus
3 ZX8/ZX82 bus module
4 RTX3 bus module
5 Wireless siren
6 GSM/GPRS module
7 Fire loop trouble 1 to 32 Zones in fire loop trouble
8Timer loss -
9 Wireless zone supervision loss
1 to 32 Zones in supervision lost
STAY RF jamming trouble
0 (10), or 10 Module supervision loss
12WPGM
2 Keypad bus (panel reset will not clear this trouble; clear it in section [955])
3 ZX8/ZX82 bus module
4 RTX3 bus module
5Wireless keypad
6 Wireless repeater
7-
8VDMP3
9PCS series
10 IP Module
STAY Wireless siren
16 Keypad fault (K32, K32RF, K37, K35 only) -
17 Upgrade panel to V3.2 or higher (K37 only) -
SLEEP Keypad fault (K636, K10V/H only) -
Table 55: Description of troubles for MG/SP control panels

Paradox MG5050 Specifications

General

Partitions	2
User Codes	32
Wireless Zones	32
Event Buffer	256 events
Remote Controls	Supports up to 32 remote controls
Standby Current	85 mA
Zones	32
Communication	GSM
Humidity	5% to 90% non-condensing
Input Voltage	16.5 VAC