Magellan & Spectra SP • Installation Guide
| 7
Setting the Time & Date
How do I set the time & date?
1
Press the [] key.
2Enter your [
MASTER CODE].
3 Press [
TBL].
4 Press [5].
5 Enter time* in the [
HH.MM] format. If HH = 13 or more, skip to step 7.
6 Select time format. [1] = 24hr; [2] = AM; [3] = PM.
7 Enter the date in the [
YYYY/MM/DD] format. You have now set the time & date. Press [CLEAR] to exit.
*For SP4000 / SP65 systems, time must be entered in 24hr format. Omit step 6 (time format).
To Next Page
Loading...
