Need help?Do you have a question about the Paradox SPECTRA SP5500 and is the answer not in the manual?
General| Partitions | 2 |
|---|---|
| User Codes | 32 |
| Event Buffer | 256 events |
| StayD Mode | Yes |
| Communication | GSM (optional) |
| Remote Control | Yes |
| System Type | Hybrid |
| Wireless Zones | 32 |
| Battery Backup | 12V 7Ah |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
| Humidity | 5% to 90% non-condensing |
Pre-requisite to enter programming mode; press [OFF] + [CODE] + [OFF].
Configure Installer, Maintenance, and System Master codes.
Steps to reset the panel to default factory settings.
Configure PGM activation/deactivation events and types.
Define zone types, partitions, options, and keyswitch settings.
Define reporting codes for zone alarms, restores, and tampers.
Configure PGM activation/deactivation events and default settings.
Configure options for PGMs like base time, state, supervision.
Configure Installer, Maintenance, and System Master codes.
Define user access levels for partitions, arming, and programming.
Configure system, code, panic, and arming/disarming settings.
Configure dialer settings and event call directions.
Configure reporting format, account numbers, and telephone numbers.
List of Contact ID report codes and their programming values.
Maps system events to Contact ID and SIA report codes.
Safety warnings and compliance guidelines for UL/ULC installations.
To Next Page
