28 Programming Guide
Wireless Repeater Programming (MG-RPT1)
Wireless Repeater Assignment
For automatic assignment, press the wireless repeater’s anti-tamper switch while in the respective section.
Wireless Repeater Signal Strength
To view the wireless repeater’s signal strength, press the wireless repeater’s anti-tamper switch while in the respective section.
Wireless Repeater Options
Section Wireless Repeater Serial Number
[545] Repeater 1 ____/____/____/____/____/____/
[546] Repeater 2 ____/____/____/____/____/____/
Section
[548] Wireless Repeater 1 Signal Strength
[549] Wireless Repeater 2 Signal Strength
Signal Strength Indicator
8 to 10 / 3 beeps = Best signal 5 to 7 / 2 beeps = Average signal 1 to 4 / 1 beep = Weak signal (Relocate)
Default:
Bold
Section:
MG-RPT1 #1
[551]
MG-RPT1 #2
[561]
Option
OFF ON OFF ON
[1]
Repeat Wireless Keypad 1 Signals
N N
[2]
Repeat Wireless Keypad 2 Signals
N N
[3]
Repeat Wireless Keypad 3 Signals
N N
[4]
Repeat Wireless Keypad 4 Signals
N N
[5]
Repeat Wireless Keypad 5 Signals
N N
[6]
Repeat Wireless Keypad 6 Signals
N N
[7]
Repeat Wireless Keypad 7 Signals
N N
[8]
Repeat Wireless Keypad 8 Signals
N N
Default:
Bold
Section:
MG-RPT1 #1
[552]
MG-RPT1 #2
[562]
Option
OFF ON OFF ON
[1]
Repeat Wireless Zone 1 Signals
N N
[2]
Repeat Wireless Zone 2 Signals
N N
[3]
Repeat Wireless Zone 3 Signals
N N
[4]
Repeat Wireless Zone 4 Signals
N N
[5]
Repeat Wireless Zone 5 Signals
N N
[6]
Repeat Wireless Zone 6 Signals
N N
[7]
Repeat Wireless Zone 7 Signals
N N
[8]
Repeat Wireless Zone 8 Signals
N N
To Next Page
Loading...
