Paradox SPECTRA SP5500

Magellan / Spectra SP 31
Wireless Keypad Programming (MG32LRF)
For standard keypad programming, see page 16.
Automatic Wireless Keypad Assignment
After panel power-up, the control panel will open a 10 minute window for Automatic Assignment. Press and hold the [ ] and [BYP] key for
three seconds on the respective keypad. The keypad is assigned to the control panel. Up to 8 wireless keypads can be assigned within
the ten minute window.
Standard Wireless Keypad Assignment
Enter serial number or press and hold the [ ] and [BYP] key for three seconds.
Wireless Keypad Signal Strength
To view the wireless keypad’s signal strength, press the [ ] key.
Wireless Repeater/Keypad Options
Section Wireless Keypad Serial Number
[571] Keypad 1 ____/____/____/____/____/____
[572] Keypad 2 ____/____/____/____/____/____
[573] Keypad 3 ____/____/____/____/____/____
[574] Keypad 4 ____/____/____/____/____/____
[575] Keypad 5 ____/____/____/____/____/____
[576] Keypad 6 ____/____/____/____/____/____
[577] Keypad 7 ____/____/____/____/____/____
[578] Keypad 8 ____/____/____/____/____/____
Section
[591] Wireless Keypad 1 Signal Strength
[592] Wireless Keypad 2 Signal Strength
[593] Wireless Keypad 3 Signal Strength
[594] Wireless Keypad 4 Signal Strength
[595] Wireless Keypad 5 Signal Strength
[596] Wireless Keypad 6 Signal Strength
[597] Wireless Keypad 7 Signal Strength
[598] Wireless Keypad 8 Signal Strength
Signal Strength Indicator
8 to 10 / 3 beeps = Best signal 5 to 7 / 2 beeps = Average signal 1 to 4 / 1 beep = Weak signal (Relocate)
[587] Wireless Repeater / Keypad Options Bold = Default setting
Option OFF ON
[1]
Repeater 1 Supervision
N Disabled N Enabled
[2]
Repeater 2 Supervision
N Disabled N Enabled
[3] to [7] N/A N/A N/A
[8]
Live Display Mode
N Disabled N Enabled