Paradox SPECTRA SP5500

44 Programming Guide
Clear Reporting Codes
Reset Reporting Codes
WinLoad Programming
WinLoad Options
WinLoad Timers
Refer to the Installer Quick Menu on page 3 for alternate programming of PC phone number, panel ID, and PC password.
Other Settings and Modes
[966] Clear Reporting Codes Bold = Default setting
Option OFF ON
[1]
Clear zone reporting codes*
N Disabled N Enabled
[2]
Clear user reporting codes*
N Disabled N Enabled
[3]
Clear arm/disarm/alarm reporting codes*
N Disabled N Enabled
[4]
Clear trouble reporting codes*
N Disabled N Enabled
* Enable all options you want to clear. The respective sets of reporting codes will be cleared after exiting the section.
[967] Reset Reporting Codes Bold = Default setting
Option OFF ON
[1]
Reset zone reporting codes to default**
N Disabled N Enabled
[2]
Reset user reporting codes to default**
N Disabled N Enabled
[3]
Reset arm/disarm/alarm reporting codes to default**
N Disabled N Enabled
[4]
Reset trouble reporting codes to default**
N Disabled N Enabled
** Enable all options you want to reset to default. The respective sets of reporting codes will be reset to default after exiting
the section.
[900] WinLoad Options Bold = Default setting
OFF ON
[1] Call back
N Disabled N Enabled
[2] Automatic event buffer transmission
N Disabled N Enabled
[3] to [8] N/A N/A N/A
Section Data Description
[901] ____/____/____ (000 to 255) rings Number of rings* (default 008)
[902] ____/____/____ (000 to 255) seconds Answering machine override delay* (default 030)
* This section applies to the Plug-In Voice Dialer when using a VDMP3.
[910] ____/____/____/____ Panel ID
[911] ____/____/____/____ PC password
[915] ___/___/___/___/___/___/___/___/___/___/___/___/__/___/___/___/___/___/___/___/___/
PC TELEPHONE NUMBER
Section Description
[950] Reset all programmable sections to factory default values
[955] Clear bus module trouble (remove disconnected module from the bus)
[960] Find wireless serial number display
[970] Download memory key into panel (see the Reference & Installation Manual)
[975] Upload panel into the memory key (see the Reference & Installation Manual)
[980] Display version number of the panel (press [ENTER] to view the next digit)