Do you have a question about the Paradox Spectra SP4000 and is the answer not in the manual?
Partitions | 2 |
---|---|
User Codes | 32 |
Event Buffer | 256 events |
StayD Mode | Yes |
Expandable via Expansion Modules | Yes |
Bus | Yes, 4-wire expansion bus |
Battery Backup | 12V 7Ah |
PGM Outputs | 2 |
Procedure to add new users or change existing user credentials.
Steps to remove user codes from the system.
Guide for configuring the system's internal clock and calendar.
How to activate chime alerts for zone openings on keypads.
Procedure to turn off chime alerts for specific or all zones.
How to view and interpret system trouble messages.
Understanding keypad beeps and light indicators for system status.
Adjusting keypad sound and light levels.
Information on the K37 keypad's power saving functionality.
Detailed overview of the K636 keypad's buttons and indicators.
Detailed overview of the K10LEDV/H keypad's buttons and indicators.
Overview of the K35 and K37 keypad interfaces.
Explanation of icons displayed on K35 and K37 keypads.
Overview of the K32+ keypad interface.
Overview of the K32LCD+ and K32LX keypad interfaces.
Visual and auditory feedback for REM2 and REM25 remote controls.
Instructions for enabling and disabling the StayD security mode.
Methods to switch between Stay, Sleep, and Full arming modes.
Procedures for transitioning between arming modes when entering or leaving.
Details on Window Mode and Live View for StayD systems.
How to perform a standard system arming.
How to arm the system while allowing movement in certain areas.
How to arm the perimeter while allowing interior movement.
How to temporarily exclude zones from arming.
Restoring previously bypassed zones.
Arming the system without requiring a user code.
Setting the system for automatic arming at specific times.
Automatic arming triggered by periods of inactivity.
Configuration options for keypad display behavior.
How the system indicates and stores alarm events.
Procedure to disarm the system and clear active alarms.
Using panic buttons for police, medical, or fire alerts.
System behavior during fire alarms, including delayed zones.
Tips for fire prevention and safety.
Guidelines for testing alarm components and routine maintenance.
Using the IP150 module for remote system monitoring and control.
Configuring the system to send text messages for events.
Examples of various SMS messages from the alarm system.
Structure and syntax for sending arm/disarm commands via SMS.
Details on user codes, actions, partitions, and phone numbers in SMS commands.
Receiving the GSM module's IP address through SMS.
Introduction to the VDMP3 voice dialer.
Steps to access and control the system via phone using VDMP3.
Visual guide for making calls to the VDMP3 system.
Visual guide for handling incoming calls from the VDMP3.
Utilizing PGMs for automated system actions.
Configuring the system into two independent partitions.
Using shortcut keys for specific system operations.
Notes on zone assignments and system partitioning.
Configuration of special keys and system features.
Configuring panic alarm types and their behavior.
Details on PGMs and PGM utility key operations.
Setting delay timers and recording the GSM module number.
Fields for recording installation and service details.
How to enter and navigate the Master Quick Menus.
Steps for programming user codes and assigning remotes.
Setting entry, exit, and other system delays.
Configuring the system's date and time settings.
Initiating communication with GSM or BabyWare modules.
Adjusting system-wide options like siren feedback.
Procedure for pairing REM3 remotes with the control panel.
Programming phone numbers and sending test reports.
Setting up scheduled automatic arming.
How to remove lost or unassigned remote controls from the system.