HOLIDAY and DAYLIGHT SAVINGS TIME
Twelve single holidays (H:01 - H:12) and two holiday durations
(H:13 - H:16) are provided. Fill in the chart at right before you begin.
Step Key Description
1 HOL H:01 displayed, indicating Holiday 1.
2 #### Enter month, then date of holiday. Press two keys for
month and two for date.
3 E Enters holiday into memory and advances to next holi-
day. Repeat steps 2 and 3 until all single holidays
through H:12 are programmed.
4 E H:13 displayed, indicating begin date for first holiday
duration.
5 #### Enter month, then date that holiday duration will
begin.
6 E H:14 displayed, indicating end date for first holiday
duration.
7 #### Enter month, then date that holiday duration will end.
8 Repeat steps 4 - 7 for second holiday duration. H:15
denotes begin date; H:16 denotes end date.
9 E Displays SPr, indicating start date for Spring Daylight
Savings Time changeover.
10 #### Enter month, then date of spring changeover.
11 Repeat steps 9 and 10 to program Fall Daylight
Savings Time changeover. Control displays FaLL.
12 RUN Restores normal operation. Time and day displayed.
Colon flashing.
Refer to page 26 for ON/OFF events for HOLIDAYS.
30
To Next Page
Loading...