Keypad Description
Master Reset - Clears time and program. Display will show "MEM CLR". The reset switch is
accessed by inserting a pointed object, such as a paper clip, into the reset
hole to the right of the keypad.
PROGRAM - This key allows the user to add, delete or change parameters (events, time,
holidays).
When pressed from the RUN mode, the programming menu is displayed start-
ing with the TIME menu header.
When pressed from a menu header, the control will advance to the next menu
header.
When pressed from a programming step, the control returns to that menu
header.
When pressed during review, the control will go to the appropriate programming
display.
9
To Next Page
Loading...
