Need help?Do you have a question about the Paragon EL71 and is the answer not in the manual?
General| Brand | Paragon |
|---|---|
| Model | EL71 |
| Category | Controller |
| Language | English |
Details the basic functionality and ease of use of the EL series time controls.
Outlines the number of events, durations, and duty cycle patterns programmable.
Lists power requirements for different models and voltages.
Details ratings for normally open and normally closed contacts.
Specifies wire gauge for input and output terminals.
Explains how program and time are maintained during power outages.
Details temperature, humidity, and mounting requirements.
Provides dimensions for NEMA 1 and NEMA 3R enclosures.
Illustrates and labels the control panel and terminal layout.
Details wiring for sensor and external override inputs.
Explains the functions of PROGRAM, REVIEW, and RESET keys.
Outlines the priority order for various control functions.
Introduces the programming sequence and modes.
Describes how to clear the control's memory.
Details how to set time, date, and daylight saving parameters.
Explains clock format selection and stagger up configuration.
Details programming sunrise/sunset times and latitude for Astro control.
Explains how to program ON/OFF, duration, and duty cycle events.
Describes configuring inputs as override or sensor types.
Details setting up events based on sensor inputs and setpoints.
Explains holiday types and their priority in control logic.
Details how to assign special holidays like Good Friday and Easter.
Details how to program holidays by specific month and date.
Details how to program holidays based on day of week.
Details how to program holidays spanning a duration.
Explains how to use keyboard and external overrides for channel control.
Details specifications for temperature sensors.
Details specifications for the light sensor.
Describes the module for PC communication and programming.
Details the Pecosoft.EL software for programming and review.
Example of controlling an air conditioner with temperature setpoints.
Step-by-step guide for programming Example 1.
Example of controlling lighting circuits using latching relays.
Step-by-step guide for programming Example 2.
Illustrates the operation of the enabler input.
Illustrates the operation of On\d override input.
Illustrates the operation of OVr override input.
Provides templates for configuration settings like duration and duty cycle.
Outlines the terms and conditions of the product warranty.
To Next Page
