Need help?Do you have a question about the Parasound Zamp v.3 and is the answer not in the manual?
Power Output| continuous power output (stereo, 8 Ω) | 45 watts RMS x 2 |
|---|---|
| continuous power output (stereo, 4 Ω) | 60 watts RMS x 2 |
| continuous power output (mono, 8 Ω) | 90 watts RMS |
Electrical Characteristics| current capacity | 12 amps peak per channel |
|---|---|
| slew rate | 90 V/µsecond |
| input impedance | 33 k Ω |
Audio Performance| frequency response | 5 Hz - 100 kHz, +0/-3 dB |
|---|---|
| total harmonic distortion (8 Ω) | 0.07% |
| total harmonic distortion (4 Ω) | 0.1% |
Power Requirements| AC power requirement | 110 – 120 V / 220 -240 V, 50 – 60 Hz |
|---|---|
| power consumption (standby) | 1 watt |
| power consumption (full output) | 220 watts |
Weight and Dimensions| dimensions (width) | 9 1⁄2" |
|---|---|
| dimensions (depth with connectors) | 10" |
| dimensions (height with feet) | 2" |
| dimensions (panel only) | 1 3⁄4" |
| dimensions (mm) | 241 x 254 x 50mm |
| net weight | 6.65 lbs., 3 kg |
| shipping weight | 9 lbs., 4.1 kg |
Details on how to unpack the Zamp v.3 and a list of included accessories.
Setting the voltage switch and ensuring proper ventilation for the unit.
Instructions for rack mounting using optional SBS or Zblank kits.
Connecting audio sources, using loop outputs, and adjusting gain levels.
Connecting speakers, polarity, and the function of the stereo/mono switch.
Steps for mono setup and configuring automatic turn-on modes.
Using 12V trigger inputs/outputs and AC power connection advice.
Operation of the power button and understanding channel, protect, and hi-temp indicators.
Using the headphone jack and basic cleaning instructions.
Diagnosing and resolving common problems like no sound, hum, or distorted audio.
Procedures for returning the unit, including RA numbers and refusal conditions.
Criteria for warranty repair and conditions that void the warranty.
Detailed technical specifications including power output, impedance, and dimensions.
To Next Page