Specications
Continuous power output:
45 watts RMS x 2, 20 Hz - 20 kHz, 8Ω, both channels driven
60 watts RMS x 2, 20 Hz - 20 kHz, 4Ω, both channels driven
90 watts RMS x 1, 20 Hz - 20 kHz, 8Ω, minimum impedance
Current capacity: 12 amperes peak per channel
Frequency response: 5 Hz - 100 kHz, +0/-3 dB
Total harmonic distortion: < 0.07 % full power; < 0.02 % typical levels
IM distortion: < 0.05 %
Dynamic headroom: 1.5 dB
Inter-channel crosstalk: 80 dB at 1 kHz; 60 dB at 20 kHz
Input impedance: 33 kΩ
Input sensitivity: 600 mV; 1.5 V for full output
S/N ratio: 116 dB, input shorted, IHF A weighted
Dimensions: 9-1/2" w x 1-3/4" h x 10" d, 2" h with feet
Net weight: 7 lbs.
Features
45 watts per channel into 8
60 watts per channel into 4
90 watts bridged into 8 mono
Fully discrete circuitry with Toroid power transformer
Low heat design
Headphone jack
Indicators for AC present and channel operating status
Automatic on/o by 9 – 12 V trigger
Automatic on/o by audio signal with adjustable sensitivity
Level controls for each channel; ground lift switch
Gold-plated RCA input jacks and looping line output jacks
5-way speaker terminals
Unique half-rack width chassis; 1 rack space high
Fastening hardware available for rack mounting
Parasound's 10 years parts, 5 years labor warranty
The Zamp v.3 continues Parasound's proven amplier design to give you stellar reliability, amazing sound
quality, and plenty of power, all in a small package. Whether you use it as a zone amplier or the
centerpiece of a mini-component system, this full featured amplier will exceed your expectations.
Zcustom
Zpre2 - Two channel preamp, 4 Audio & Video inputs with 2-way RS-232 control
Features
Two-way RS-232 serial port connection
Four line-level audio and four composite video inputs
Input 1 auto select priority function, defeatable
External IR repeater Input jack
Remote control includes discrete codes for O and On
Switchable auto or manual turn on/o
12 V trigger automatic turn/o, defeats Power button
12V output to trigger other components
Record outputs for video and fixed level audio
Headphone jack, automatically mutes line out
Gold-plated RCA jacks
Analog motor-driven volume control
Outstanding design, parts quality and specs
Voltage switchable between 115v and 230v
Unique half-rack width chassis; 1 rack space high
Fastening hardware available for rack mounting
Specifications
Frequency Response – Audio
10 Hz - 100 kHz, +0/-3 dB
10 Hz - 50 kHz, +0/-0.8 dB
Frequency Bandwidth – Composite Video: 10 MHz
Total Harmonic Distortion: 0.006%
S/N Ratio: 112 dB, input shorted, IHF A-weighted
92 dB, input shorted, unweighted
Input Impedance: 15k Ω
Input Sensitivity: 150 mV for 1 V output
Maximum Output: 7.6 V
Crosstalk: 83 dB at 1 kHz; 76 dB at 20 kHz
Tone Controls: Bass +/- 8 dB at 100 Hz
Treble +/- 10 dB at 10 kHz
AC Power Requirement: 110 – 120 V / 220 -240 V, 50 – 60 Hz
2 watt standby; 20 watts when turned on
Dimensions: 9
1
/2” Wide x 10” Deep with connectors x 2” High with feet
13.4” panel only, 241 x 254 x 50mm, 44.1mm panel only
Net Weight: 4.6 lbs, 2.1 kg
Need help?
General