14
The primarily used control elements are described. Other
control elements are possible. Your service technician can
address any additional instructions that may be necessary.
Autonomous control panel
4 pushbuttons, lit for feedback of the action.
› Park position „P“
→ Parking, engaging the parking block in automatic transmissions.
› Driving gear „R“
→ Reverse, shifting into reverse gear.
› Driving gear „N“
→ Neutral (idle), engine and transmission are decoupled.
› Driving gear „D“
→ Drive, forward driving with automatic gear selection.
→ Selection of the sub-gears 1, 2, or 3.
Integrated control panel e.g. in the joystick
The same function or operation as with an autonomous
control panel.
Fig. 5: Bedienfeld Gear Control
2.4.2 Operating elements
Fig. 6: Integriertes Bedienfeld