Pard Predator Series - Page 25

—
21
—
6. Scene
There are three built-in scene modes, "City", "Forest" and "Rain". Users can choose any of the available
scenes to achieve the best image display effect.
●
toggle [Key 5] to move the cursor to the scene option, press [Key 3] to enter the sub-menu.
●
toggle [Key 5] to move the cursor to select "City", "Forest" or "Rain" mode. Press [Key 3] to save and
return to the previous page.
7. Hot Track
The device can detect and display the highest temperature point on the screen, and automatically
track this target heat source.
●
toggle [Key 5] to move the cursor to the hot track setting option, and press [Key 3] to enter the sub-
menu.
●
toggle [Key 5] to move the cursor to select “Off” or “On”. Press [Key 3] to save and return to the
previous page.
8.Self-activated Recording
●
"Display" indicates whether (or not) to display the yaw and pitch angle of the device on the home
screen. Toggle [Key 5] to select "Off" or "On", and press [Key 3] to save and return to the menu.
●
“Calibrate” means to enter the calibration state. After selecting, please place the device on a
horizontal plane surface, and press [Key 3] to perform automatic calibration. After calibration, the
device will automatically return to the home screen.
When the device detects recoil, the whole shooting process will be recorded in 20 second intervals.
The incremental 20-second video footage will be saved on the SD card.