—
22
—
●
toggle [Key 5] to move the cursor to the self-activated recording setting, and press [Key 3] to enter
the sub-menu.
●
toggle [Key 5] to select “OFF”, “ON” and “Impact Sensitivity” options
●
After selecting “Off” or “On”, press [Key 3] to save and return to the previous page.
●
After selecting "Impact Sensitivity", press [Key 3] to enter the sub-option menu of sensitivity level.
Toggle [Key 5] to select “Low”, “Medium” or “High” mode. Press [Key 3] to save and return to the
previous page.
9. Auto Power Off
After selecting your preferred time duration, the device will sense the last point of operation before
beginning the shutdown. Auto power off will start after the device has been idle then it automatically
triggers the auto power off command.
●
toggle [Key 5] to move the cursor to select the auto power off setting, and press [Key 3] to enter the
sub-menu.
●
toggle [Key 5] to select "Off", "One minute", "Ten minutes" or "Thirty minutes" duration options. After
selection, press [Key 3] to confirm and save, and return to the previous page.
10. Auto Recording
After auto recording is on, device will start recording and continue to record after the next startup.
●
toggle [Key 5] to move the cursor to the auto recording setting option and press [Key 3] to enter the
sub-menu.
●
toggle [Key 5] to select “Off” or “On” options, press [Key 3] to save and return to the previous page.