Pard Predator Series - Page 27

—
23
—
11. Loop Recording
Users can customize the segment recording duration. This can be set up under loop recording. When
the capacity of the memory card is full, the new recording will automatically overwrite the previous
saved files. When you select “Off”, the recording will stop when the memory card is full, and the oldest
video file will not be overwritten.
●
toggle [Key 5] to move the cursor to the loop recording setting option, and press [Key 3] to enter the
sub-menu.
●
toggle [Key 5] to move the cursor to select preferred loop time duration "Off", "One minute", "Three
minutes", "Five minutes" or "Ten minutes". Press [Key 3] to save and return to the previous page.
12. Date Stamp
Users can set whether to display the time stamp in the lower right corner of photos and videos taken.
●
toggle [Key 5] to move the cursor to the date stamp setting option, and press [Key 3] to enter the
sub-menu.
●
toggle [Key 5] to move the cursor to select “Off” or “On” options. After selection, press [Key 3] to save
and return to the previous page.
13. Record Audio
User can set whether to record audio synchronously in the video.
●
toggle [Key 5] to move the cursor to the recording audio setting option, press [Key 3] to enter the
sub-menu.
●
toggle [Key 5] to move the cursor to select “Off” or “On” option, after selection, press [Key 3] to save
and return to the previous page.