Parker 892 Series - Elec;Hyd Shift Option B (12 V) & D (24 V) - W;O EOC 890;892 Series (SK-459 Rev C); Installation Sketches

Bulletin HY25-1890-M1/US
Owner’s Manual
10-Bolt Extended Shaft PTOs
Parker Hannifin Corporation
Chelsea Products Division
Olive Branch, MS 38654 USA
17
Installation Sketches
Elec/Hyd Shift Option B (12V) & D (24V) – w/o EOC
890/892 Series
(SK-459 Rev B)
NOTE: Strip Wire Ends .25" Prior to Installing in Spade Terminal or Butt Connector (As Necessary)
O
READ OWNERS
CHELSEA
O F F
P. T. O. IS ENGAGED WHEN LIGHT IS ON
N
MANUAL
379265 Grommet
Electrical Ground of Cab or Frame
Accepts #10 Screw
Slice Grommet Insert in Hole 379265 Grommet in Firewall
Drill 1" Dia. Hole in Firewall
Black
379504 Valve Connector and Wire Assembly
Pre-2005 - Connect to Pin J1-6 (TCM) or Wire #106 2005-Later - Connect to Pin 43 (TCM) or Wire #143 Contact chassis OEM for Location Details
Run Wires through Grommet in Firewall
379254-17 14-Gauge Wire with Fork Terminal
379306 Spade Terminal
378881 Rocker Switch
379252 Butt Connector
Indicator Light 378978 - 12V 379005 - 24V
379336 Switch Bracket
Positive Terminal of Ignition or Battery
379257 Splice Connector
379900 Fuse Holder Ass’y w/ 10 Amp Fuse
Blue
Red
Reference Kit - 329024-12X for 12V Installation. Reference Kit - 329024-24X for 24V Installation. Connection to Transmission Controller is Required for Full Pressure to PTO Clutches.
379502 Pressure Switch
Torque to 24-28 lbs-ft