Parker D1VW EE Series - Ordering Code Structure; Valve and Solenoid Configuration; Spool Type and Position Codes; Seal Options and Voltage Codes

D1VW_EE 5715-690 UK.indd 11.07.22
Directional Control Valve
Series D1VW Explosion Proof Operating Instructions
7
Parker Hannin Corporation
Code Voltage
J 24 V=
P 110 V/50 Hz
N 230 V/50 Hz
Solenoid options:
Explosion proof
Ex e mb IIC +
IECEx conformity
Connection:
Explosion
proof
with cable
glands
Design
series
(not required
for ordering)
Solenoid
voltage
Further spool types, styles and combinations on request.
Directional
control
valve
Wet pin
solenoid
3-chamber
valve
Seal
Spool
position
Spool
type
Size
DIN NG06
CETOP 03
NFPA D03
3 position spools
Code Spool type
a 0 b
001
002
003
004
005
006
007
008
1)
009
1)
010
011
014
015
016
021
022
081
082
102
2 position spools
Code Spool type
a b
020
026
030
101
3 position spools
Code all 3 position spools
C
3 positions.
Spring o󰀨set in position “0“.
Operated in position “a“ or “b“.
Standard
Spool type 008,
009
E
Operated in
position “a“.
Operated in
position “b“.
2 positions.
Spring o󰀨set in position “0“.
K
Operated in
position “b“.
Operated in
position “a“.
2 positions.
Spring o󰀨set in position “0“.
2 position spools
Code Spool position
B
2 positions.
Spring o󰀨set in position “b“.
Operated in position “a“.
D
2 positions.
Operated in position “a“ or “b“.
No center or o󰀨set position.
H
2 positions.
Spring o󰀨set in position “a“.
Operated in position “b“.
1)
Consider specic spool position
Ordering code
Code Seal
N NBR
V FPM
1 V W E ED