Parker HTG Series User Manual

Service Manual
HTG Series Integrated Hydrostatic Transmission
11
Parker Hannin Corporation
Hydraulic Pump/Motor Division
Greeneville, Tennessee USA
HY13-1524-002-M1/US
General Information
Component ft-lbs in-lbs
End Block to Housing 22.5-25 270-300
Charge Cover Bolts 7.5-9.5 90-110
Shock/ Check Valves 21-24 252-288
Motor Bolts 45-55
Oil Filter 9.6-11.3 115-135
Fan Nut 55-70
Control Arm Bolt 12.5-15 150-180
Brake Assembly 25-28
Castle Nut / Patch Lock Nut
200- 300
plus rotation to align
Cotter Pin
Self locking nut (for brake drum) 200 - 300 min.
Hose Barb/ Expansion Fitting 16.6-20 200-240
Fill Plug (Vent Plug) 8.3-10 100-120
Bottom Cover/ Side Cover Bolts (Initial Assembly) 8.3-10 100-120
Bottom Cover (Repair/ Rebuild) 6-8 72-96
Side Cover (Repair/ Rebuild) 48-72
Return To Neutral Bolts 22-24
Drain Plug (Aluminum Washer PN: 029130) 38-42
HTG Transmission Assembly Rebuild Bolt Torques

Parker HTG Series Specifications

General

Brand	Parker
Model	HTG Series
Category	Industrial Equipment
Language	English