Parker HTG Series - Page 28

28
Parker Hannin Corporation
Hydraulic Pump/Motor Division
Greeneville, Tennessee USA
HY13-1524-002-M1/US
Disassembly & Inspection
Service Manual
HTG Series Integrated Hydrostatic Transmission
HY13-1528-001-M1/US—HTG Series Service Manual
Disassembly and Inspection
Step
InstructionIllustration
Remove brake assembly.
Remove vent plug
1. Loosen and remove the 4 bolts from the
brake assembly using a ratchet and a
5/16” 12 pt socket.
2. Inspect bolts for damage.
3. Pull brake hub off brake assembly.
3. Pull off brake assembly
1. Using a 5/16” hex head socket, loosen
the vent plug.
2. Remove the vent plug from the top of
the housing.
Remove lter 1. Using a ratchet and a 15/16” socket,
loosen the lter.