Parker IQAN-XC21 - Installation

9
Connector C1, C2, C3 and C4
6 Installation
Instruction book, IQAN-XC21
6 Installation
Connector C1, C2, C3 and C4
NOTICE
Tin plated contacts must NOT be used, the header has gold plated terminals and this
must be matched on the receptacle to fulfill all environmental requirements.
Connector kit Parker N/A
Mating connector Molex no. 43025-1000
C1
Pin type (loose) Molex no. 43030-0008
Pin type (reel) Molex no. 43030-0002
Plating Selective gold 0.38µm (there is also
a 0.76µm version)
Recommended
cable
ø1.85mm max (AWG 20, 22, 24)
Mating connector Molex no. 43025-0800
C2
Pin type (loose) Molex no. 43030-0008
Pin type (reel) Molex no. 43030-0002
Plating Selective gold 0.38µm (there is also
a 0.76µm version)
Recommended
cable
ø1.85mm max (AWG 20, 22, 24)
Mating connector Molex no. 43025-0600
C3
Pin type (loose) Molex no. 43030-0008
Pin type (reel) Molex no. 43030-0002
Plating Selective gold 0.38µm (there is also
a 0.76µm version)
Recommended
cable
ø1.85mm max (AWG 20, 22, 24)
Mating connector Molex no. 43025-1200
C4
Pin type (loose) Molex no. 43030-0008
Pin type (reel) Molex no. 43030-0002
Plating Selective gold 0.38µm (there is also
a 0.76µm version)
Recommended
cable
ø1.85mm max (AWG 20, 22, 24)
6
1
10
5
5
1
8
4
4
1
6
3
7
1
12
6
www.comoso.com