Need help?Do you have a question about the Parker IQAN-XT2 and is the answer not in the manual?
General| Category | Automobile Accessories |
|---|---|
| Touchscreen | Yes |
| Supply Voltage | 9-32 VDC |
| Operating Temperature | -40°C to +85°C |
| Storage Temperature | -40°C to +85°C |
| Ethernet | Yes |
| Weight | 1.2 kg |
| Communication Interfaces | CAN, Ethernet, USB |
| Number of Digital Inputs | 8 |
| Number of Analog Inputs | 4 |
| Number of PWM Outputs | 4 |
| Number of Relay Outputs | 2 |
| Display Size | 7 inch |
| Resolution | 800 x 480 |
Explains safety symbols and recommendations for safe operation.
Critical information and warnings to review before starting work.
Critical safety measure for disconnecting power during emergencies.
Guidelines for physically installing the module safely and effectively.
Details about the C1 connector and its pin assignments.
Instructions on how to connect the power supply to the module.
How to assign unique addresses and terminate the CAN-bus.
How to connect proportional valves to current output pins.
Step-by-step instructions for initial system start and verification.
Detailed guide to error codes, actions, and comments for troubleshooting.
To Next Page