Parker IQAN-XT2 - Error Situations and Corrective Actions

27
Error codes, messages and actions
Appendix B
Instruction book, IQAN-XT2
Appendix B
Error codes, messages and actions
If one of the following errors are detected, a message will be presented on the display
together with an error code on the module. In some cases, the module will turn off or at
least shut down the outputs, to increase safety.
WARNING
Don’t use the machine if an error message or error code is activated.
The following sections will present what measures to take for different error situations
put into appropriate context.
LED indicator showing different IQAN-XT2 modes
Status Blink (yellow light)
Normal (no errors)
Error
code
Error Blink (red light)
1 I/O and
voltage errors
2 High
temperature
3 CAN error
4 Hardware
error
5 Address error
6 Software error