UM1004 | MRO-00011 05/21 Rev.0 DCO-016875 12
5. Place Anti-Rotation Sub (Y-63700-161-1) in a friction vise (or utilize a friction tong) and remove Threaded Seal
Piston (TSP) (Y-63700-58-1) using locking pliers [Joint D].
6. Remove (4) Elastomer Bonded Compression Stacks (J-28348-53).
7. Utilize open end wrench to remove Tapered Drive Washer (Y-63700-105-1) [Joint E].
8. Remove (2) Elastomer Bonded Rebound Stacks (J-28348-45).
To Next Page
Loading...
