UM1004 | MRO-00011 05/21 Rev.0 DCO-016875 16
5. Install the Anti-Rotation Sub (Y-63700-161-1) in Friction Vise. Install the Inner Member (Y-63700-103-1) into the Anti-
Rotation Inner Member (Y-63700-162-1) [Joint F] through the Anti-Rotation Sub (Y-63700-161-1). Kopr-Kote may be
added to tip of Inner Member shaft (Y-63700-103-1) to lubricate tapered shoulder for assembly.
6. Use 7/8" friction wrench, securing Inner Member (Y-63700-103-1) to Anti-Rotation Inner Member (Y-63700-162-1)
and torque to 100 ft-lb. [Joint F].
To Next Page
Loading...
