UM1004 | MRO-00011 05/21 Rev.0 DCO-016875 18
10. Install Tapered Drive Washer (Y-63700-105-1) hand tight [Joint E].
Ensure the undercut/thread relief on Inner Member is 50% exposed.
11. Install (4) Bonded Compression Stacks (J-28348-53).
12. Apply LOCTITE 243 or LOCTITE 262 to Threaded Seal Piston (TSP) (Y-63700-58-1).
13. Hand tighten TSP to Inner Member (Y-63700-103-1) [Joint D].
To Next Page
Loading...
