Parker P2 Series - Manual Introduction and Purpose

PUMP AND MOTOR DIVISION
Neefestraße 96
09116 Chemnitz, Germany
3.2 Connection P3
Minimum pump inlet pressure under static and dynamic load: p
in min
= 0,8 bar absolute
Maximum pump inlet pressure: p
in max
= 1 bar
Arrangement outside tank.
Fill pump case with 0.5 l of fluid prior to start up.
Do not restrict suction line.
Arrangement outside tank.
Fill pump case with 0.5 l of fluid prior to start up.
Do not restrict suction line.
3.2.1 Arrangements P3
Arrangement outside tank.
Fill pump case with 0.5 l of fluid prior to start up.
Do not restrict suction line.
Arrangement outside tank.
Fill pump case with 0.5 l of fluid prior to start up.
Do not restrict suction line.
Preferred arrangement for best suction
characteristics + low noise level operation
www.comoso.com