Parker P2 Series - Troubleshooting Guide; Troubleshooting Preparation; Preliminary System Checks; Hydraulic Component Checks

PUMP AND MOTOR DIVISION
Neefestraße 96
09116 Chemnitz, Germany
3.2.2 Drain line connection P3
OPTIONAL AIRBLEED
CONNECTION
Connect compensator drain line with the reservoir.
Keep inlet and drain line separate (hot loop).
ATTENTION!
Combination and restriction of compensator
drain line may result an back pressure.
Maximum continuous drain line pressure:
p
drain
= 2 bar
Maximum intermittent peak drain line pressure:
p
drain
= 4 bar
www.comoso.com