PA2 PowerStation User Guide 1-1
INTRODUCTION 1
Thank you for purchasing a PA2 PowerStation. The PA2 PowerStation is a
rugged, compact PC that is designed to be used as an industrial operator
interface.
The PA2 PowerStation is available in four display configurations: 6”, 8”,
10”, and 15” and one version with no display (PA200V). It has an all-in-one
PC board with Serial, Ethernet, and USB ports. The PA2 PowerStation’s PC
architecture allows you to run Parker’s Interact HMI software product.
Mechanically, the PA2 PowerStation is designed to fit older PA
PowerStation mounting cutouts and can be used as a direct replacement.
Important:You must upgrade to Interact version 6.17 or later before
downloading applications to the PA2 PowerStation.
Please take time to review this manual and the other documentation
included with the PA2 PowerStation before operating the unit.
Using this Manual
This manual is designed to help you set up and use your PA2 PowerStation.
The manual lists the PowerStation’s specifications and describes its
replacement and optional components. It also explains how to install the
unit, how to maintain the unit in good condition, and how to solve common
problems that may occur in operation.
This manual is divided into the following chapters:
Chapter 1 — Introduction: Presents an overview of this manual, the
other documentation and software provided with the PA2 PowerStation,
and the steps necessary to get your PowerStation up and running. This
chapter also describes Parker’s customer support services.
Chapter 2 — Installing the PowerStation: Explains how to select an
installation location, prepare for installation, and finally install the PA2
PowerStation.
Chapter 3 — Starting Your PowerStation: Describes the ports available
to connect the PowerStation to other devices and to a power source. Also
described are steps to startup the PowerStation.
Chapter 4 — Maintaining the PowerStation: Explains how to maintain
the PA2 PowerStation, including the touchscreen, replacing the
CompactFlash, and performing internal maintenance.
To Next Page
Loading...