Parker PSE1400 - Parameters

8/14
PSE 1400-6000 60Hz
English
5.2.4.4 Parameters
Touch to enter
on “parameter” menu with the
following sections: probes,
condensate drain, confi gura-
tion, maintenance, cycle.
Touch the “button touch” to en-
ter on menu.
Touch
to return to the
previous menu.
Probes
Touch to set
the warnings and delays or the
minimum/maximum of dew
point.
Condensate drain
Touch to enter
on the menu “condensate
drain” to choose:
1. timed drain (choosing the
closing and opening times);
2. capacitive drain;
3. contiunous drain (external
drain).
Touch
to the previous
menu.
Confi guration
Touch to enter
on confi guration display with
the following menu:
1. Unit of measure C° / F°;
2. Enabling remote control;
3. Enabling only alarms or
alarms / warnings;
4. Reset the settings with the
defoult parameters.
use the “button touch” close to the description to make your choise.
Y To manage REMOTE OFF mode, remove the bridge between terminals: 87-92, and connect the
remote start/stop switch (to be provided for by the customer).
Maintenance
Touch to see the
work hours compressor/dryer.
Touch
to the previous
menu.